Land Rover Engines Ranked Worst to Best

The most reliable modern Land Rover engine is the 508PS 4.4 SDV8, scoring 83/100, while the 306DT 3.0 SDV6 scores just 39/100 thanks to its catastrophic crankshaft bearing failure. That 44-point gap is the largest in our engine rankings and should determine every Land Rover buying decision. Based on 24,650 UK enquiries in 2025, this guide ranks every major Land Rover engine from worst to best, explains what fails, what it costs to fix, and who should buy each one.
The Short Answer
Best modern engine: The 508PS 4.4 SDV8 (620 enquiries, [EM-VERIFIED]) scores 83/100 with no catastrophic failure mode — it's the diesel V8 to buy
Worst: engine: The 306DT 3.0 SDV6 (980 enquiries, [EM-VERIFIED]) scores 39/100 — its crankshaft bearing failure is common, expensive, and often writes off the vehicle
Petrol alternative: The 204PT 2.0 Ingenium Petrol (480 enquiries, [EM-VERIFIED]) scores 86/100 — it's the most reliable Ingenium engine but thirstier than its diesel counterpart
Reformed diesel: Post-2019 204DTD Ingenium diesels (1,150 enquiries, [EM-VERIFIED]) score 79/100 — the tensioner fix eliminates the catastrophic failure mode
Budget buy: The 276DT 2.7 TDV6 (700 enquiries, [EM-VERIFIED]) scores 43/100 — its oil pump failure is survivable (£1,500–£3,000) if caught early
How We Ranked Them
Every Land Rover engine in this ranking is scored across five dimensions, each weighted according to what actually matters when you're buying, owning, or repairing one of these vehicles.
Reliability (25 points): Based on documented failure patterns from our proprietary enquiry data, specialist interviews, and manufacturer technical service bulletins. An engine with no catastrophic failure mode scores higher than one with a known time bomb.
Repair Cost (25 points): The supply cost of a reconditioned engine, drawn from actual supplier quotes processed through our CRM. Cheaper engines to replace score higher, even if they fail more often — a £2,000 repair is less painful than a £10,000 one.
Repairability (15 points): How difficult the engine is to work on. Engines that require engine-out procedures or have limited specialist support score lower. Simple, accessible designs score higher.
Parts Supply (15 points): The availability and cost of replacement parts. Engines with multiple suppliers and good aftermarket support score higher. Rare engines with NLA (no longer available) parts score lower.
Replacement Economics (20 points): The ratio of replacement cost to vehicle value. If a £10,000 replacement makes sense in a £40,000 vehicle, it scores well. If the same replacement exceeds the vehicle's value, it scores poorly.
Land Rover Engines Ranked Worst to Best
Rank | Engine | Score /100 | Enquiries [EM-VERIFIED] | Recon Cost [EM-QUOTE] | One-line Verdict |
|---|---|---|---|---|---|
1 | 508PS (4.4 SDV8) | 83 | 620 | £8,000–£12,000 | The only modern JLR diesel with no catastrophic flaw — buy with confidence |
2 | 448DT (4.4 TDV8) | 83 | 320 | £6,000–£9,000 | Durable, manageable repair costs — the sensible V8 diesel choice |
3 | 204PT (2.0 Ingenium Petrol) | 86 | 480 | £3,000–£5,000 | Petrol Ingenium has no catastrophic failure mode — reliable but thirsty |
4 | 204DTD (post-2019 diesel) | 79 | 1,150 | £3,500–£5,800 | Revised tensioner design fixes the catastrophic issue — now a safe buy |
5 | 276DT (2.7 TDV6) | 43 | 700 | £5,000–£7,500 | Oil pump failure is survivable (£1,500–£3,000) — budget accordingly |
6 | 204DTD (pre-2019 diesel) | 49 | 1,150 | £3,500–£5,800 | Timing chain tensioner is a time bomb — avoid unless the work is done |
7 | 306DT (3.0 SDV6) | 39 | 980 | £6,500–£9,500 | Crankshaft bearing failure is catastrophic and common — the one to avoid |
8 | 368DT (3.6 TDV8) | 38 | 650 | £5,500–£8,000 | Early crankshaft fracture and tensioner risks — for enthusiasts only |
How the Scores Break Down
To understand why the 508PS scores 83/100 and the 368DT languishes at 38/100, here's the full dimension-by-dimension breakdown for the best and worst engines.
Dimension
508PS (Score)
How Determined
368DT (Score)
How Determined
Reliability
20
5.0★ × 4 — no documented catastrophic failure mode
4
1.0★ × 4 — early crankshaft fracture + tensioner failure
Repair Cost
4
Recon £8,000–£12,000, midpoint £10,000 → £9,000+ bracket
4
Recon £5,500–£8,000, midpoint £6,750 → £7,000–£8,999 bracket
Repairability
12
Standard modern V8 layout; specialist diagnostics needed
8
V8 complexity; engine-out for major repairs; specialist-only
Parts Supply
16
Well-supported, multiple suppliers
8
Limited for 3.6 unit; some parts NLA or long lead times
Replacement Economics
31
£10,000 vs lowest L405 value £14,000 = 71% → 60–74% bracket
14
£6,750 vs lowest L320 value £4,000 = 169% → 75%+ bracket
TOTAL
83/100
38/100
Evidence Confidence: High — all engines have strong enquiry volume and well-documented failure patterns.
The Engines in Detail
#1 — 508PS (4.4 SDV8) — The Durable Diesel
What it is: JLR's 4.4-litre V8 diesel, fitted to the L405 Range Rover and L494 Range Rover Sport from approximately 2014 onwards. It produces 508PS (hence the name) and is the most powerful diesel in the Range Rover lineup.
What fails: Oil cooler leaks in the valley of the V8, and oil dilution from DPF regeneration on L405 models that see mainly urban use. Both are manageable repairs — not catastrophic failures. The 508PS has no documented bottom-end design flaw, which is exceptional among modern JLR diesel V8s.
What it costs: £8,000–£12,000 reconditioned supply-only, [EM-QUOTE]. Fitted costs add £1,040–£1,300 in labour at independent rates, based on 16–20 hours at £65/hr.
Who should buy it: Anyone buying a Range Rover or Range Rover Sport who wants a diesel V8. The 508PS is the only modern JLR V8 diesel with no catastrophic bottom-end flaw. If you're towing, covering high mileage, or simply value reliability in a premium SUV, this is the engine to seek out.
UK values: £18,000–£55,000 [THIRD-PARTY, Auto Trader 2025]. Replacement-to-value flag: ✅ Safe.
#2 — 448DT (4.4 TDV8) — The Sensible V8 Choice
What it is: The earlier 4.4-litre TDV8, fitted to the L322 Range Rover from 2010–2012 and continuing into early L405 and L494 models. It's the predecessor to the 508PS and shares much of its robust architecture.
What fails: Oil cooler leaks (same valley-of-V8 issue as the 508PS), coolant crossover pipe failures, and alternator failure. All are manageable repairs with no catastrophic bottom-end risk. Repairs typically range from £1,200–£2,500 for oil cooler work [PATTERN DATA].
What it costs: £6,000–£9,000 reconditioned supply-only, [EM-QUOTE]. Fitted costs add £1,170–£1,560 at independent rates (18–24 hours).
Who should buy it: Budget-conscious V8 buyers who can't stretch to a 508PS-equipped L405. The 448DT is the most reliable L322 engine and remains a sensible choice in early L405 models. It's less powerful than the 508PS but shares the same fundamental robustness.
UK values: £5,000–£18,000 [THIRD-PARTY]. Replacement-to-value flag: ✅ Safe.
#3 — 204PT (2.0 Ingenium Petrol) — The Reliable Petrol
What it is: The 2.0-litre turbo petrol Ingenium engine, fitted to the Evoque, Discovery Sport, and Velar from approximately 2017 onwards. It's the petrol counterpart to the much-maligned 204DTD diesel.
What fails: Water pump failure and cooling system issues — both manageable repairs rather than catastrophic failures. The 204PT has no known timing chain or bottom-end failure modes. Repairs typically cost £400–£800 for water pump replacement [PATTERN DATA].
What it costs: £3,000–£5,000 reconditioned supply-only, [EM-QUOTE]. Fitted costs add £650–£910 (10–14 hours).
Who should buy it: Urban owners who prioritise reliability over fuel economy. The 204PT has no catastrophic failure mode — it simply gets on with the job. It's thirstier than the diesel Ingenium, but the trade-off is significantly lower risk of a major failure. For owners doing mainly short trips or city driving, the 204PT is the smarter choice.
UK values: £10,000–£45,000 [THIRD-PARTY]. Replacement-to-value flag: ✅ Safe.
#4 — 204DTD (post-2019 diesel) — The Reformed Diesel
What it is: The 2.0-litre Ingenium diesel, post-2019 revision with the revised timing chain tensioner design. Fitted to the Evoque L551, Discovery Sport, and Velar.
What fails: Oil dilution (particularly in urban use), EGR cooler leaks, and DPF clogging. The critical change is that the post-2019 tensioner fix eliminates the catastrophic timing chain failure that plagued earlier units. Repairs are in the £600–£1,200 range for EGR cooler work [PATTERN DATA].
What it costs: £3,500–£5,800 reconditioned supply-only, [EM-QUOTE]. Fitted costs add £650–£910 (10–14 hours).
Who should buy it: High-mileage owners buying a post-2019 Land Rover. The 2019 tensioner fix eliminates the catastrophic failure mode, and the diesel's fuel economy advantage over the 204PT becomes meaningful at higher annual mileages. If you're covering 15,000+ miles per year, the post-2019 204DTD is a sensible choice.
UK values: £16,000–£38,000 [THIRD-PARTY]. Replacement-to-value flag: ✅ Safe.
#5 — 276DT (2.7 TDV6) — The Survivable Risk
What it is: The 2.7-litre V6 diesel, fitted to the Discovery 3 and early Range Rover Sport L320. It's the predecessor to the 306DT and has a different failure profile.
What fails: Oil pump housing failure at the tensioner mount point — a weak spot that can cause the oil pump to fail, starving the engine of oil. Unlike the 306DT's crankshaft bearing failure, the 276DT's oil pump failure is survivable if caught early. Cold-start knock is the early warning sign. Full engine replacement costs £5,000–£7,500 [PATTERN DATA].
What it costs: £5,000–£7,500 reconditioned supply-only, [EM-QUOTE]. Fitted costs add £910–£1,170 (14–18 hours).
Who should buy it: Budget buyers who can budget £1,500–£3,000 for oil pump work as a preventative measure. The 276DT is the least terrifying budget option in the Land Rover diesel lineup. If you're buying a Discovery 3 or early RR Sport and have a modest budget, factor the oil pump work into your purchase price and you'll have a serviceable vehicle.
UK values: £4,000–£10,000 [THIRD-PARTY]. Replacement-to-value flag: ⚠️ Watch.
#6 — 204DTD (pre-2019 diesel) — The Time Bomb
What it is: The 2.0-litre Ingenium diesel, pre-2019 revision with the original timing chain tensioner design. Fitted to the Evoque L538, Discovery Sport L550, and early Velar.
What fails: Timing chain tensioner failure — catastrophic and well-documented. The chain stretches, the tensioner fails, and the engine jumps timing. The result is piston-to-valve contact and a destroyed engine. Full engine replacement costs £4,500–£6,500 [PATTERN DATA].
What it costs: £3,500–£5,800 reconditioned supply-only, [EM-QUOTE]. The same as post-2019 units — the difference is the failure risk, not the replacement cost.
Who should buy it: Only buy if the timing chain tensioner work is already done and documented. A pre-2019 204DTD with the original tensioner is a ticking time bomb. If the work has been completed with receipts from a reputable specialist, it's effectively a post-2019 engine. Otherwise, walk away.
UK values: £16,000–£38,000 (same as post-2019, but values affected by known risk). Replacement-to-value flag: ✅ Safe if tensioner fixed, ⚠️ Watch if not.
#7 — 306DT (3.0 SDV6) — The One to Avoid
What it is: The 3.0-litre V6 diesel, fitted to the Discovery 4, L405 Range Rover, and L494 Range Rover Sport. It's the successor to the 276DT and the most problematic engine in this ranking.
What fails: Crankshaft bearing failure due to tin-aluminium coating fatigue on the bearing shells. The failure is often preceded by a cold-start knock — but not always. When it goes, it typically takes the entire bottom end with it. Bottom-end rebuilds cost £5,500–£7,000, while full reconditioned engines run £6,500–£9,500 [PATTERN DATA].
What it costs: £6,500–£9,500 reconditioned supply-only, [EM-QUOTE]. Fitted costs add £975–£1,300 (15–20 hours).
Who should buy it: Only buy if you're prepared for a potential £6,500–£9,500 bill or to scrap the car. The 306DT is the engine to avoid in the Land Rover range. It's common, the failure is well-documented, and the repair cost frequently exceeds the vehicle's value. No amount of servicing can reliably prevent this failure — it's a design issue, not a maintenance issue.
UK values: £6,000–£18,000 [THIRD-PARTY]. Replacement-to-value flag: ⚠️ Watch (sub-£10k examples at 🔴 Scrap Threshold).
#8 — 368DT (3.6 TDV8) — For Enthusiasts Only
What it is: The 3.6-litre V8 diesel, fitted to early L322 Range Rovers (2006–2009) and L320 Range Rover Sports. It's the predecessor to the 4.4 TDV8 and the least recommended engine in this ranking.
What fails: Timing chain tensioner failure and crankshaft fracture — both catastrophic. The early 3.6 unit is known for tensioner failure in the 70k–130k mile range, and crankshaft fractures are not uncommon. Full engine replacement costs £6,000–£9,000 [PATTERN DATA]. Chain replacement alone is £1,500–£3,000.
What it costs: £5,500–£8,000 reconditioned supply-only, [EM-QUOTE]. Fitted costs add £910–£1,170 (14–18 hours).
Who should buy it: Enthusiasts prepared to scrap the car if the engine fails. Not recommended for ordinary buyers. The 368DT is the weakest point in the L322 and L320 lineup, and replacement economics are poor — a £6,750 recon cost against a sub-£5,000 vehicle value makes it a likely write-off.
UK values: £5,000–£15,000 [THIRD-PARTY]. Replacement-to-value flag: ⚠️ Watch.
Why This Ranking Might Differ for You
High-mileage drivers: The 204DTD diesel's fuel savings may offset its lower reliability score compared to the 204PT petrol. If you're covering 20,000+ miles per year, the diesel's superior economy could justify the additional risk — especially post-2019.
Short ownership cycles: If you're only keeping the car for 2–3 years, a pre-2019 204DTD or 306DT might be acceptable with a comprehensive warranty. The risk is real, but it's not your problem if it fails under warranty.
Towing: The 306DT and 508PS deliver excellent towing capability — the 508PS is the safe choice, the 306DT is the gamble. If you need the torque for towing, stretch to the 508PS if you can.
Budget buyers: The 276DT is the least terrifying budget option — its oil pump failure is survivable and can be addressed preventatively. The 306DT and 368DT are genuine write-off risks.
Where Our Data Comes From
This ranking is based on 24,650 UK engine enquiries through our network in 2025 [EM-VERIFIED], combined with direct interviews with 12 vetted Land Rover specialists and cross-referenced against manufacturer technical service bulletins and public forum data. Enquiry-based data reflects share of enquiries, not share of fleet — high enquiry volumes can reflect large vehicle parc, not necessarily high failure rates. Vehicle valuations are based on 2025 UK market data [THIRD-PARTY, Auto Trader, Motors.co.uk] and individual vehicle values may vary significantly.
The Engine Score is our editorial assessment, built from proprietary enquiry data and specialist input. It is not a customer review score.
Frequently Asked Questions
What's the most reliable Land Rover engine?
The 204PT 2.0 Ingenium Petrol scores highest in our ranking at 86/100, with no catastrophic failure mode. However, it's a petrol engine in a heavy SUV, so fuel economy suffers. Among diesels, the 508PS 4.4 SDV8 scores 83/100 and has no catastrophic bottom-end flaw — it's the diesel V8 to buy.
Which Land Rover engine should I avoid?
The 306DT 3.0 SDV6 is the one to avoid. Its crankshaft bearing failure is well-documented, catastrophic, and the repair cost (£6,500–£9,500) frequently exceeds the vehicle's value. The 368DT 3.6 TDV8 is a close second — early crankshaft fracture and tensioner failure make it a high-risk purchase.
Is the 306DT really that bad?
Yes. Based on our 2025 enquiry data, the 306DT generated 980 quote requests — the second-highest of any Land Rover engine. The failure pattern is well-documented: crankshaft bearing shell fatigue leads to bottom-end failure, typically in the 80k–140k mile range. No amount of servicing can reliably prevent it. Cold-start knock is the early warning sign — but not all failures give warning.
What's the cheapest Land Rover engine to replace?
The 204PT Ingenium Petrol is the cheapest reconditioned engine on this list at £3,000–£5,000 supply-only. Among diesels, the 204DTD runs £3,500–£5,800. However, the cheapest engine to replace isn't necessarily the best buy — the 204PT's fuel consumption over time may offset its lower replacement cost.
Can a 306DT or 368DT failure be prevented?
For the 306DT, the short answer is no. Crankshaft bearing failure is a design issue — the tin-aluminium coating fatigues over time regardless of maintenance. Regular oil changes may delay failure but won't prevent it. For the 368DT, the timing chain tensioner can be replaced preventatively (£1,500–£3,000) — but crankshaft fracture remains a risk even on well-maintained examples. If you're buying either, budget for the worst-case outcome.
The Final Verdict
If you're buying a Land Rover, the engine choice is the single most important decision you'll make. The 508PS 4.4 SDV8 and 448DT 4.4 TDV8 are the diesel V8s to buy — they have no catastrophic failure modes and replacement costs are proportionate to vehicle values. The 204PT Ingenium Petrol is the most reliable engine overall, with a score of 86/100, but fuel economy suffers. The post-2019 204DTD diesel is a safe buy thanks to the revised tensioner design. Avoid the 306DT 3.0 SDV6 and 368DT 3.6 TDV8 unless you're prepared for a potential write-off. The 44-point gap between the 508PS (83/100) and 368DT (38/100) should determine every Land Rover buying decision.
Based on UK enquiry data from January–December 2025 [EM-VERIFIED]. Vehicle values per Auto Trader, Motors.co.uk 2025 [THIRD-PARTY].
Need a Replacement Land Rover Engine?
Get an instant quote for reconditioned or tested low-mileage Land Rover and Range Rover engines with full warranty coverage.